These take care of axial loads in only one direction, which is why solitary row angular contact sphere bearings are generally mounted by placing two single row angular call ball bearings back-to-back, face-to-face, or in tandem. Consequently, several directional pressures can be fit. Bearings are locked right into the area with the aid of a locking collar, to avoid moving along the axle.


  • Back-to-back: By installing the bearings in this manner, they can fit both radials as well as axial tons in any kind of direction. Because the range between the bearing center, as well as the loading point, is larger than various other installing methods, it can manage big short-term, as well as alternating tons forces.
  • Face-to-face: With this mounting series the bearing can handle radial and axial tons in either direction. Nevertheless, since the range between the bearing center and loading point is smaller sized through this install, momentary, as well as alternating force ability is lower.
  • Tandem: A tandem mount can fit solitary directions axial tons as well as radial tons. Since the tons on the axis are received by both bearings it can deal with hefty axial loads.


To get info on Ball screw BLK [บอลสกรู BLK, which is the term in Thai], please click on the link.


Double row angular call ball bearings


The dual row setup of angular call sphere bearings resembles two solitary row angular contact ball bearings put back-to-back, yet calls for the less axial area. In addition to radial, as well as axial loads, they are likewise capable of soaking up turning minutes.


Self-aligning round bearings


Self-aligning sphere bearings are utilized when an application is likely to struggle with misalignment or shaft deflection. It has two rows of spheres that share the outer, round raceway, while the inner ring has two angular contact deep groove raceways. Due to the fact that the balls are held in a location in the inner raceway, but have some flexibility of movement on the outer raceway, the bearing has the ability to operate even when it is out of placement with the shaft. However, they cannot fit high tons applications.